Check point 4. Check compressor
Check compressor. (Refer to inverter compressor in "Service parts information".)
↓
Check point 5. Check transistor PCB
Check transistor PCB. (Refer to transistor PCB in "Service parts information" on page 03-75.)
↓
Check point 6. Replace main PCB
If Check point 1 to 5 do not improve the symptom, change main PCB.
↓
End
2-22. E: 65. IPM error (Outdoor unit) - (03-36) - 2. Troubleshooting with error code
TROUBLESHOOTING
TROUBLESHOOTING