Operation
Activate/deactivate ECO operating mode
The power consumption of the dev ice can be decre ase d by reducing
the brightness of the pictu re.
► Press th e Forwards / ECO button to switch the ECO operating mode on o r off.
The message Ac tion was executed appears.
If the ECO operating m ode is activated, the following OSD settings are changed:
Colour
temperature
6500K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously se t by the user is restored.
Locking the OSD menu
The O SD menu can be locked to preven t accidental or unauthorised changes to the monitor s ettings.
► Press and hold the
SELECT/ME
NU
button for a few seconds while you switch
on the monitor with the ON/OF F switc h .
The Action was executed mess
age appears.
Please proceed in the same
manner to release the locked OSD m en u again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unautho rised
changes to the monitor settings.
► Press the Forwards / ECO button and the Back /
INPUT
button at the same
time and keep them pressed for a few seconds.
The message Ac tion was exe
cuted appears.
Please proceed in the sam
e manner to release the locked ON/OFF switch again.
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) menu.
16 A26361-K1333-Z220-1-7619, edition 1
To Next Page
Loading...
Need help?
General
