Operation
Changing the monitor settings
When putting the monitor into operation for the first time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor settings
with the buttons
of th e c ontrol panel
The b uttons of the control panel have two functions. With th e OSD menu not
activated, you can make the following settings directly:
SELECT/ MENU
INPUT
EXIT / AUTO
123
ECO
1 = Buttons for the OSD menu (O n-Screen
Display)
2 = Power supply indicator
3 = ON/OFF switch
Performing auto-adjustment of the monitor
► Press the
EXIT / AUTO
button for about 1 s econd.
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting input signal (D-SUB/DVI-D )
► Press the Back /
INPUT
button to open the Input select setting window.
► Press the Forwards / ECO button or the Back /
INPUT
button to select the
desired monitor connection (VGA or DVI).
This setting window can also be called when the O SD menu is locked.
A26361-K1334-Z220-1-761 9, edition 1 15
To Next Page
Loading...
