Working with the notebook
Connecting the noteboo k to the Port Replicator
If you connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
The mains adapter m ust be connected to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD monitor closed whe n
the notebook is connected to the Port Replicator. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.
PortReplicator
► Switch the notebook off.
► Remove the power plug of the mains ada pter from the mains so cket.
► Disconnect the ma ins adapt er cable from the DC socket (DC IN) of the notebook.
1
► Position the n otebook so that it is in line with the back edge of the Port Replicator.
► Push the notebook onto the P ort Replicator in the d irection of the arrow
(1) until you notice it engage.
Fujitsu 45
To Next Page
Loading...
