Connecting e xtern a l devices
Connecting an external SATA hard disk (eSATA)
(port replicator only)
The notebook itself does not have an e SATA port. The optional Port Replicator
available for your notebook provides this port.
An external SATA hard disk can be connected at the eSATA po rt. This allows you
to expand the internal hard disk capacity as you wish.
The length of the eSATA cable must not exceed 2 m etres. Consult a specialist
dealer for advice on which eSATA data cable is suitable for your exte rnal eSATA
hard disk. Make sure that th e hard disk has its own external power supply.
The data transfer rat e is up to 2,400 Mbit/s.
eSATA
► Connect the data cable to the external
device.
► Connect the data cable to the eSATA port.
Device drivers
The eSATA hard disk is automatica lly recognised by your operating system and installed.
You w ill find more information in the documen tatio n for the external SATA
hard disk and the operating system.
Safe removal of eSATA and USB devices
Always cor
rectly remove the device according to the rules described below,
to ensure
that none of your data is lost.
► Left-click on the symbol to remove hardware safely.
► Select t
he device you wish to shut down and remove.
► Press the "Enter" key.
Wait fo
r the dialogue box which tells you that it is now safe to remove the device.
Fujitsu 61
To Next Page
Loading...
