Fujitsu CELSIUS H760 - Exiting BIOS Setup Utility; Exit Saving Changes - Save Changes and Exit BIOS Setup Utility; Exit Discarding Changes - Discard Changes and Exit BIOS Setup Utility; Load Setup Defaults - Copy Standard Entries

Connecting external devices
Connecting U SB devices
USBports
On the USB ports, you can connect external devices tha t a lso have a USB po rt
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.
USB 1.x has a maximum data transfer rate of 12 M bit/s.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
USB 3.0 has a data trans
ferrateofupto5Gbit/s.
Additional informati
on can be found in the documentation for the USB devices.
► Connect the data cable to t he
external device.
► Connect the data cable to a USB
port of the notebook.
Device d rivers
USB devices will be automatically recognised and installed by your operating system.
58 Fujitsu