Settings in BIOS Setup Utility
Exiting BIOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Change s - save ch
anges and exit BIOS Setup Utility
► To save the current menu settings and exit the BIO S Setu p Utility, select Exit Saving Changes and Yes.
The notebook is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setup Utility
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is terminated and the notebook is rebooted.
Load Setup Defaul
ts – Copy Standard Entries
► To copy the s tandard entries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Chang es – Discard changes without exiting
the B IOS Setup Utility
► To discard the changes you have m ad e, select D iscard Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, s elect Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the B IOS Setup Utility
► To save th e changes, select Save Changes and Yes.
The changes are saved. You c an now make additional settings in the BIOS Setup Utility.
► If you want to exit BIOS S etup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the changes and switch off your d evice, select Save Changes and Power Off and Yes.
The changes are saved. Your device is shut down.
72 Fujitsu
To Next Page
Loading...
