Removing and installing components
during servicing
Attaching the cover
2
2
1
► Place the cover in the correct mounting position (1).
If you remove more than one component at the same time, keep the screws for the
individual components separately from each othe r a nd m ake sure that you u se th e
correct screws. If you install the wrong screws, components may be damaged.
► Tighten the screws (2).
► Insert the battery (see Chapter "
Installing a battery", Page 32).
Finishing component removal
After you have removed or changed the system components as you required, please
prepare y our device for operation again as follows:
► Install the battery again (see "
Installing a battery", Page 32).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disco nnected before.
Fujitsu 69
To Next Page
Loading...
