Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► M ake sure that t he printer is sw
itched
on and ready for operation (ref
er to the
documentation supplied w ith t
he printer).
The printer is not connected c
orrectly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whethe r the correct printer driver is
loaded (refer to the printer documentation).
The wireless connec
tion to a network does not work
Thewireless conne
ctiontoan etworkdoes notwork
Cause Troubleshooting
The wireless compo
nent is disabled.
► Switch the wireless component on (see
"
Switching the wireless components on and
off", Page 41).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
► Check whether the wireless connectio n is
switched on via the software.
► Further information on using the wireless
component can be found in the help files.
SmartCard re
ader is not recognised.
Cause
Troubleshooting
Chip card inserted incorrectly.
► Make sure yo
u have inserted your
SmartCard i
nto the Sma rtCard reader
with the ch
ip facing upwards/downwards
(device-d
ependent).
► Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
SmartCard PIN forgotten
Cause
Troubl
eshooting
PIN forgotten ► If you are working in a network, contact your
system administ rator, who can unlock your
notebook with a Supervisor PIN.
Fujitsu 77
To Next Page
Loading...
