9 Miscellaneous
9.1 Trusted Platform Module (TPM)
TPM V1.2 controller: Infineon SLB 9635 TT1.2
TPM Infineon
TPM Jumper
Note:
- TPM Jumper must be installed in order to enable the TPM hardware (installed = default)
- TPM must be enabled in BIOS Setup before its features can be used
- For applications / customers that do not what to use TPM, the full functionality can be disabled and
hidden in BIOS Setup by the OEMIDENT tool. See OEMIDENT readme for details.
Once TPM has been disabled by OEMIDENT, it cannot be re-enabled again (only possible by factory RMA)!