Fujitsu D3231-S User Manual

a
g
e
5
Page
TechNotes D323x-S_D3243-S V1.2 Page 56 of 98 http://www.fujitsu.com/fts/products/computing/pc/accessories/mainboards
mainboards
System Monitoring
4.13 BMC – BIOS Default Settings D3243-S
The default system monitoring settings like fan speed, sensor influence, and Alert temperatures are fixed by the system BIOS.
All relevant settings can be customized by system builders via the SilentFanConfig-Manager tool kit.
Sensors 
PECI (Processor)
Super I/O
MCard
PCH
VCore
Graphics
Fan1 (CPU)
X
X
Fan2
X
X
X
X
X
Fan3
X
X
X
X
X
Fan4/PSU
X
X
X
X
X
“X” indicates that this specific sensor influences the speed of this specific fan
StartUp
1)
FullSpeed
2)
Alert
3)
Note
PECI (Processor)
72
89
89
These settings are fixed by the BIOS (depends on the
individual installed processor) and cannot be changed via
SilentFanConfig-Manager.
Super I/O
50°C
65°C
70°C
These settings are implemented for the current
BIOS version and may be changed for upcoming
BIOS versions!
Default minimum fan speed = 30% (all fans).
MCard
50°C
65°C
70°C
PCH
55°C
70°C
80°C
VCore
60°C
75°C
80°C
Graphics
50°C
65°C
70°C
4) If the sensor temperature is below “StartUp” the fan rotates a its defined minimum fan speed
5) Between “StartUp” and “FullSpeed” the fan speed increases linear
6) If the sensor temperature achieves “Alert”, the system can provide a warning (e.g. via SystemGuard tool)

Fujitsu D3231-S Specifications

General

Brand	Fujitsu
Model	D3231-S
Category	Motherboard
Language	English