16 D3320 - BIOS Setup Utility BX2560 M2
CPU Status
Calls a submenu used to watch the processor status (see "CPU Status"
on page 22).
CPU Configuration
Calls a submenu used to make additional processor settings (see "CPU
Configuration" on page 23).
The adjustment options available in this submenu depend on the
processor being used.
Memory Status
Calls a submenu used to watch the memory modules status (see
"Memory Status" on page 31).
Memory Configuration
Calls a submenu used to setup the memory subsystems (see "Memory
configuration" on page 31).
SATA Configuration
Calls a submenu containing the settings for the corresponding SATA
controller (see "SATA Configuration" on page 33).
CSM Configuration
Opens the submenu for configuring the Compatibility Support Module
(CSM) (see "CSM Configuration" on page 35).
Trusted Computing
Calls a submenu used to make additional system settings (see "Trusted
Computing" on page 37).
USB Configuration
Calls a submenu used to set up the USB components on the system
board (see "USB Configuration" on page 38).
Intel mezzanine card
Calls a submenu used to configure Intel Mezzanine card. Some of them
are only available under special preconditions (see "Intel Mezzanine
card option ROM configuration" on page 42).
Super IO Configuration
Calls a submenu used to configure System Super IO Chip parameters
(see "Super IO Configuration" on page 42).
Network Stack Configuration
Calls a submenu used to set up the UEFI network stack (see "Network
Stack Configuration" on page 43).
To Next Page
Loading...
