Fujitsu D3320 PRIMERGY BX2560 M2 - Intel Mezzanine Card Option ROM Configuration; Super IO Configuration; 4.13.1 Serial Port 1 Configuration

42 D3320 - BIOS Setup Utility BX2560 M2
Advanced menu
4.12 Intel Mezzanine card option ROM
configuration
Slot n LAN1
Specifies the option ROM configuration for this port.
Disabled
No option ROM will be loaded for this port.
PXE
The PXE option ROM will be loaded for this port.
Slot n LAN2
Specifies the option ROM configuration for this port.
Disabled
No option ROM will be loaded for this port.
PXE
The PXE option ROM will be loaded for this port.
4.13 Super IO Configuration
Displays System Super IO Chip Parameters.
Super IO Chip
Displays information about Super IO Chip.
4.13.1 Serial Port 1 Configuration
Set Parameters of Serial Port 1 (COM1).
Serial Port
Specifies whether the serial port is available.
Disabled
The serial port is not available.
Enabled
The serial port is available.
Device Settings
Displays the base I/O address and the interrupt used to access the
corresponding serial port, e.g. IO=3F8h; IRQ=4.