Fujitsu D3320 PRIMERGY BX2560 M2 - D3320 - BIOS Setup Utility BX2560 M2

74 D3320 - BIOS Setup Utility BX2560 M2
Flash BIOS Update
The following Recovery screen is shown in BIOS setup:
Figure 9: Recovery screen
Reset NVRAM
If user wants to set BIOS settings to the default, then select Enabled. In
most cases you have to keep this setting. S2LBIOS does not support
BIOS setup value reservation between different versions of BIOS.
Enabled
This option resets the NVRAM to default values.
Disabled
Keeps the BIOS settings if you are trying to recover BIOS with the
same version.
Proceed with flash update
If you choose Proceed with flash update the update will start.
– Observe the update process on the screen, until it is finished. The recovery
update may take several minutes.