Getting started
Removing monitor base
Before you can use a s wivel a rm or a similar acce ssory, you must remove the m on itor base.
The display surface is suscept ible to scratching!
2
1
► Switch off the monitor and pull the power
plug out of the power socket.
► Lay the monitor on its face on a soft surface.
► Disconn ect all cables.
► Pull the base plate out of the foot (1 ).
► Remove the foot from the carrier at the
back of th e monitor (2).
You can now mount a swivel arm or a
similar accessory in accordance with VESA
FPMPMI using a hole spacing of 100 mm.
For instructions
on how to mount the swivel arm or a similar accessory, please
see th e documen
tation for the swivel arm or similar accessory.
Fujitsu 15
To Next Page
Loading...
