Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• TFT display (Thin Film Transistor; active matrix)
• minimal space requirement
s thanks to slim casing
• optimum ergonomic cha racteristics (totally distortion-free, excellent picture
definition and colour purity right into the co rners)
• high degree of brightne
ss and good contrast
• high resolution (1920 x 1080)
• presentation of up to 1
6.7 million colours (in conjunction with an appropriate display adapter)
• automatic scanning of horizontal f requen cies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 56 to 76 Hz (absolutely flicker-free)
• digital screen contr
oller with microprocessor for sto ring 46 different display mode s
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient opera
tion via integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI com
patibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device
for swivel arm or a similar accessory
• Plug&Play capability
• Digital video
inputs (DVI and DP) with HDCP
• power manag ement for reducing powe r consumption when the computer i s not in use
• Compliance w
ith the recommendations according to the latest TCO requirements
• the monitor fulfills all GS ("Geprüfte Sicherheit", Ce rtified Security) requirements.
This operat
ing manual contains important information you require to start up and run your LCD monitor.
To control a
n LCD monitor, a graphics card (screen controller) with a VGA interface, a digital
graphics c
ard with a DVI interface or a video signal source with a DP interface is requ ired. The
monitor pr
ocesses the data supplied to it by the graphics card. T he graphics card or the associated
driver so
ftware is responsible for setting the modes (resolution and refresh rate).
When putt
ing the monitor into operation for the first time , the screen display should be
optimal
ly adapted to the display adapter used and a d justed in acco rdance w ith y our
needs (s
ee chapter "
Changing the monitor settings", Page 19).
Target group
You don’t need to be an " expert" to perform the operations described here.
Nonetheless, it is important to always observe the safety notes given in the operating
instructions for the computer and in this man ual.
In the e ven t of any problems, please contact your sales office or our Service Desk.
Fujitsu 5
To Next Page
Loading...
Need help?
General