Fujitsu ESPRIMO D75 Series - Page 17

Getting started
3
2
1
4
5
6
6
3
3
4
► Place the device on the right side as shown.

The screw holes (6)
and guide openings (4) for securing the feet on the
left side of the dev
ice point u pwards.
► Place the feet (3) on the left side of the device so that the pins (2) enter into the correspon ding
guide openings (4) on the device and the screws rest against the screw ho les (6).
► Tighten the scr
ews to s ecure the feet.
► Stand
the device on the f eet as shown.
Fujitsu 13