Fujitsu ESPRIMO D75 Series - Removing 2½ Inch Drives from a 3½ Inch Adapter

System expansio ns
Removing 2½ inch drives from a 3½ inch adapter
1
1
2
3
► Press the EasyCha
nge rails on the drives slightly together (1) and pull the drives with
the EasyChange r
ails one after the other out of the ada pter (2, 3).
a
► Pull the EasyCh ange rails off the first drive.
► Repeat the step for the s econd drive.
► If you no longer need the EasyChange rails, secure them again at their location in the adapter.
Fujitsu 47