Fujitsu ESPRIMO D75 Series - Mainboard Expansions; Upgrading Main Memory; Processor, Replacing

System expansions
3
b
► Place the cowl in the casing (3) at a slight a ngle and pay attention that the pins
(b) fit into the openings on the casing as shown.

The cowl engages at
the l ocatio n marked "PULL".
► Fit the casing cover back onto the casing (see Chapter "
Reattaching the casing cover.", Page 33).
Mainboard expansions
Details on how
to upgrade the main memory or the processor of your device
can be found in
the manual for the mainboard.
UpgradesLithium batter yProcessorMainmemoryMainboard
Upgrading main memory
► Remove the casing cover (see Chapter "Removing the casing cover", Page 32).
Mainmemory,
► Upgrade the memory according to t he description in the manual for the mainboard.
► Fit the casing cover back onto the casing (see Chapter "
Reattaching the casing cover.", Page 33).
Processor, replacing
► Remove the casing cover (see Chapter "Removing the casing cover", Page 32).
Proces sor,repl acing
► Remove the heat sink (see "Removing the he at sin k", Page 68).
► Upgrade the processor according to the description in the manual for t he mainboard.
► Reinstall the hea t sink (see "
Install ing the heat sink", Page 69).
► Fit the casing cover back onto the casing (see Chapter "
Reattaching the casing cover.", Page 33).
70 Fujitsu