System expansio ns
Removing a slimline drive
► Remove the casing cover (see Chapter "Removing the casing cover", Page 32).
► Disconnect the cables connected to the slimline drive.
2
3
1
► Press the clip in t
he direction o f the arrow (1).
► Push the slimline drive a few centimetres out of the bay in the direction of the arrow (2).
► Pull the slimli
ne drive completely out of the bay in the direction of the arrow (3).
4
► Detac
h the drive plate from the slimline drive (4).
Fujitsu 41
To Next Page
Loading...
