System expansions
a
5
1
► Slide the drive plate (a) into the upper bay (5) again as shown, until it engages.
It is essential to ensure that the drive plate is installed in the correct
installation direction (see illustration).
► If you are not in
stalling a new slimline drive, chang e the drive cover (see
chapter "
Chang
ing the drive cover", Page 35).
► Fit the casing cover back onto the casing (see Chapter "
Reattaching the casing cover.", Page 33).
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
42 Fujitsu
To Next Page
Loading...
