Package Size
The ETERNUS AF
is shipped in cardboard boxes. These boxes may not fit through some doorways or elevators. To
make sure that the ETERNUS AF can be moved to the installation site, carefully check the transport route infor-
mation.
The following table shows the package size and the maximum package weight of each component for regions
other than the EMEIA, Central American, and Caribbean regions.
Table 4 Package Size (for Regions other than the EMEIA, Central American, and Caribbean Regions)
Component
Package size (W ´ D ´
H)
Maximum weight
Controller enclosure
600 ´ 760 ´
240mm
Approximately 40kg
Drive enclosure
600 ´ 660 ´ 240mm
Approximately 40kg
Drive (*1)
160 ´ 278 ´ 106mm
Approximately 0.5kg
Power distribution unit (*2) 1U
570 ´ 710 ´
160mm (*3),
540 ´ 380 ´ 310mm (*4)
Approximately 4kg (*3),
Approximately 5kg (*4)
2U
(390 ´
590 ´ 180mm) ´ 2
(*5),
(540 ´ 380 ´ 310mm) ´ 2 (*6)
(Approximately 7kg) ´ 2 (*5),
(Approximately 10kg) ´ 2 (*6)
*1: When an order for optional drives to be installed in the factory is placed, enclosures are shipped with the
drives preinstalled.
When optional drives are ordered without preinstallation, each drive is shipped in an individual package.
*2: For power distribution units, there are multiple types of exteriors.
*3: These values are for product ID ETFP4BU-L.
*4: These values are for product ID ETFP4DU-L.
*5: These values are for product ID ETFP16U-L / ETFP12U-L.
*6: These values are for product ID ETFP48U-L / ETFP32U-L.
1. ETERNUS AF Installation
Package Size
14
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
To Next Page
Loading...
