Fujitsu ETERNUS AF250 - Page 143

Usage Protocol tcp / udp
Port
number
Direction
Master CM Slave CM
Remarks
MNT RMT MNT RMT
Syslog
(event notification
and audit log send-
ing)
Syslog udp Must be
set
to
¡ (*2) ¡ (*2)
´ ´
−
RADIUS Radius udp Must be
set
to
¡ (*2) ¡ (*2)
´ ´
−
ping ICMP − − from
¡ (*2) ¡ (*2)
´ ´
−
KMIP (key manage-
ment)
SSL tcp 5696 (*3) to
¡ (*2) ¡ (*2)
´ ´
−
ETERNUS DX Discovery Unique
protocol
udp 9686 from
¡
´ ´ ´
−
¡: Available / △: Available for some functions / ´: Not available
*1: Only the following functions are available:
• Checking the
ETERNUS AF status
• Switching the Master CM
*2: May use either the MNT port or RMT port.
*3: Modifiable
For details on the port numbers for the Storage Foundation Software ETERNUS SF, refer to the manual of each
Storage Foundation Software ETERNUS SF.
2. Connection Configuration
LAN Connection
143
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1822-09ENZ0