Fujitsu ETERNUS AF250 - Drive; Figure 106 Installation Diagram for 2.5 Drives

Drive
This section explains the installation rules for drives.
■
2.5" Drives
The installation priority order for 2.5" drives is shown below.
1 2.5" SSDs (400GB)
2 2.5" SSDs (960GB)
3 2.5" SSDs (1.92TB)
4 2.5" SSDs (3.84TB)
5 2.5" SSDs (7.68TB)
6 2.5" SSDs (15.36TB)
7 2.5" SSDs (30.72TB)
8 2.5" self encrypting SSDs (1.92TB)
9 2.5" self encrypting SSDs (3.84TB)
10 2.5" self encrypting SSDs (7.68TB)
According to the installation order, install drives in the slots of a controller enclosure from Slot#0 to Slot#23 in
ascending order. Then, install drives in the slots of a drive enclosure from Slot#0 to Slot#23 in ascending order.
Figure 106 Installation Diagram for 2.5" Drives
Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7
Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
3. Hardware Configurations
Standard Installation Rules
157
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1822-09ENZ0