SSD Sanitization
The SSD sanitization function deletes data in the SSDs by using the sanitization function of the SSDs. The SSD
sanitization function can be used to delete user data for cases such as the disposal of the SSDs.
Executing the SSD sanitization function (or the sanitization command) initializes the entire NAND (or data/alter-
nate areas) of the SSDs. The SSDs can be used again after the SSD sanitization function is executed.
The Maintenance Operation policy is required to sanitize the SSDs. Also, change the status of the ETERNUS AF
to the maintenance status.
4. Maintenance/Expansion
SSD Sanitization
162
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1822-09ENZ0
To Next Page
Loading...
