● 2 - 4
■ Connecting the interface cable
When running Windows 95 or Windows NT 4.0, connect the SCSI interface cable. When running Windows
98, Windows ME, Windows 2000 or Windows XP, connect either USB or SCSI cable.
NOTICE
1. If the scanner is connected to the computer with both interface cables, USB interface connection will be
used.
2. Do not connect the scanner to 2 PCs, one with USB Interface and the other one with SCSI interface.
When connecting the scanner with USB interface cable.
1. Connect the USB interface cable to the
scanner.
2. Connect the other end of the USB interface
cable to the computer.
NOTICE
1. Be sure to use USB cable which is provided with the scanner.
2. When connecting to a USB hub, use the first stage hub that is closest to the computer.
If you use a the second or later hub stages, the scanner may not operate properly.
To Next Page
Loading...
Need help?
General
