● 7 - 13
if fi-434PR(IMPRINTER) and fi-475CMP3(JPEG COMPRESSION BOARD) are installed,Screen 28
will appear.
Screen 28
if fi-434PR(IMPRINTER), IPC4D(IMAGE PROCESSING CIRCUIT BOARD) and fi-475CMP3(JPEG
COMPRESSION BOARD) are installed,Screen 29 will appear.
Screen 29
2. Press to return.
11 Low Power Mode Setting
1. Press “Next” or “Previous” and let the scanner display Screen 30.
Screen 30
2. At Screen 30, press or to select the time duration. A minimum of 5 min to the maximum of 60
minutes can be selected. Then press to activate the setting.
NOTICE
The default time recommended by the E
NERGYSTAR
®
program is 15 minutes. The default for the fi-
4340C scanner is 15 minutes, as recommended.
3. Press to return.
NO OK OK
!
1 0IP
C
P R TJPE
G
IPC-4
D
OK OK
!
10 I P
C
PRT JPE
G
=
10 15
2
0min
!
1 3Po
w
e
rSave
To Next Page
Loading...
Need help?
General
