AP-6
<ADF cover open> The following message is displayed if the ADF cover is not closed completely.
Close the ADF cover completely, to enable the scanning.
<Double feed error>
(by overlapping check)
The following message is displayed, when a double feed is detected by paper
overlapping check.
<Double feed error>
(by thickness check)
The following message is displayed, when a double feed is detected by paper
thickness check.
(by length check) The following message is displayed, when a double feed is detected by paper
length check.
<Mis-pick> The following message is displayed, when a document is not sent from the
hopper to the ADF.
HINT
The Check LED does not blink when a Mis-pick error occurs.
<Pick overrun> The following message is displayed, when a document is sent from the hop-
per to the ADF and it overruns its normal position.
F- C
o
verp
enAD
O
D
d
e
efSUo
S
u
bl
e
D
uelo
b
F ede
L
nhte
g
erorr
M-s
i
p cki
P
i
k
ov
c
erunr
To Next Page
Loading...
