Fujitsu fi-4860C2

AP-7
<Skew error> The following message is displayed, when a document is fed skewed from the
hopper to the ADF.
<Hopper is full or
Pick unit not set>
The following message is displayed, when the Pick roller unit is not set cor-
rectly or when there are too many documents loaded on the hopper.
(When there are any documents on the hopper.)
<Pick unit not set> The following message is displayed, when the Pick roller unit is not set cor-
rectly.
(When there are no documents on the hopper.)
<Pick unit not set> The following message is displayed, when the Pick roller unit is not set cor-
rectly during scanning.
<Brake roller not set> The following message is displayed, when the scan operation is performed
while the Brake roller unit is not set correctly.
I
rulgr
e
a prp
er
a
H
preo
p
o ervo
ad
l
otn
ets
P
croi
k
l erlu
ni
t
P
croi
k
l erlu
ni
t
a
otn
ets
Bke
r
ore
r
l
l