The [Setup] dialog box appears.
10. Select the [Event] tab.
11.
Click the action of the Event you selected in step 5, and then select a profile from the list you want
to use for scanning.
HINT
You have to create profiles beforehand.
For information about how to create profiles, refer to "
Batch Scan" in Section "2.6 How to
Use ScandAll PRO."
12. Click the [OK] button.
13. Exit ScandAll PRO.
When you press the linked button, ScandAll PRO starts up, and batch scan is executed according to the selected
profile’s settings.
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/03/c03_15_01.htm (3/4) [2008/10/30 15:14:36]
To Next Page
Loading...
