3. From the list on the left of the panel, select [Device Setting].
You can confirm the following information in this panel:
Total Page Count (ADF/FB) Total scanned sheets
Brake Roller Number of sheets scanned since last replacement of the Brake roller
Pick Roller Number of sheets scanned since last replacement of the Pick roller
Remaining Ink Remaining ink in the imprinter's (sold separately) ink cartridge.
(Displayed only when the imprinter option is used.)
Resetting the Consumables Counters
Reset the consumables counter(s) every time you replace the consumable(s), following the procedure given below.
1. Click the [Clear] button beside the replaced consumable.
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/05/c05_02_01.htm (2/4) [2008/10/30 15:15:34]
To Next Page
Loading...
