3. Adjust the Offset/Scan scale as necessary.
Offset Setting
Target
Select ADF front, ADF back, or FB as target.
Horizontal
Adjusts the horizontal Offset.
Setting range -2 mm to +2 mm, in steps of 0.5 mm.
Vertical
Adjusts the vertical Offset.
Setting range -2 mm to +2 mm, in steps of 0.5 mm.
Scan scale setting
Target
Select ADF or FB as target.
Vertical
Adjusts the vertical (document length) Scan scale.
Setting range -3.1% to +3.1%, in steps of 0.1%.
All Rights Reserved. Copyright 2007-2008 © PFU LIMITED
file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/08/c08_03_01.htm (2/2) [2008/10/30 15:15:03]
To Next Page
Loading...
