HINT
● To suppress scanning the patch code sheet images, check the [Remove separation
sheet] checkbox.
● In duplex scan mode, you can disable scanning of the rear side of the patch code
sheet by selecting the [Delete the next page of a separation sheet] checkbox.
5. Insert patch code sheets to wherever you want the file/folder to separate.
6. Specify the created batch profile, and then perform the batch scan.
For how to perform the batch scan, see "
Batch Scan" in Section "2.6 How to Use ScandAll PRO."
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/03/c03_16_01.htm (2/4) [2008/10/30 12:42:19]
To Next Page
Loading...
