HINT
When storing each of the scanned documents, which are separated with patch-code sheets,
in separate folders, change the settings in the [Name Rule] dialog box opened by clicking the
[Name Rule] button on the [File format and Name scheme] tab in the [Profile Editor] dialog
box.
Mark the [Create Directories Separately] checkbox in the [Name Rule] dialog box.
The created folder is named with the title of the document counter and is used to store the
scanned data.
Example of storing data in folders:
file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/03/c03_16_01.htm (3/4) [2008/10/30 12:42:19]
To Next Page
Loading...
