Fujitsu fi-6670 Getting Started Guide

17
4 Installing the Scanner Software
Brief Information on the Bundled Software
To scan documents with this scanner, you must install a scanner driver for operating the scanner as well
as scanning software (hereinafter called the "application") for launching the driver and performing a
scan.
The scanner drivers and applications provided with the scanner are as follows:
■TWAIN Driver
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant
applications.
■ISIS Driver
Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant
applications.
■Software Operation Panel
Configures settings for scanning behavior and consumable management. Installed together with
the scanner drivers (TWAIN/ISIS).
■Error Recovery Guide
Shows the error status and the action to take when an error occurs. Can be installed together with
the scanner drivers (TWAIN/ISIS).
■Image Processing Software Option
A software option featuring advanced binarization of scanned images. Can be installed together
with the scanner drivers (TWAIN/ISIS).
■Kofax VRS [VRS(scanner model names)] (*1)
A software program that allows you to generate high-quality images with a simple operation.
Senses for any documents skewed during scanning, checks for any characters blurred during
coloring or shading, and then corrects them automatically. Not available with the fi-6750S.
■ScandAll PRO
ScandAll PRO is a software application for scanning images, which is in compliance with both
TWAIN/ISIS standards. By assigning scan settings into batch profiles, it enables one-touch
operations to perform scanning in ways that best suit your needs.
■ScandAll PRO ScanSnap mode Add-in (hereinafter referred to as “ScanSnap
mode”)
An add-in application which provides a different set of driver settings as an alternative to using
ScandAll PRO. TWAIN driver is required to use this application. Enables easy scanning with a
single button. ScandAll PRO must be installed in order to install this software.
■Scan to Microsoft SharePoint
Scan to Microsoft SharePoint is a software application for uploading files onto the SharePoint site
via ScandAll PRO or ScandAll PRO ScanSnap mode Add-in. It can be installed together with
ScandAll PRO.
■ABBYY FineReader for ScanSnap
TM
Bundled for use with ScanSnap mode, this application converts scanned images into Microsoft
®
Office (Word/Excel™/PowerPoint
®
) files. Can be installed together with ScanSnap mode.

Fujitsu fi-6670 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	256
Input color depth	24 bit
Maximum scan size	279.4 x 431.8 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
Maximum duty cycle	450000 pages per month
Auto document feeder (ADF) input capacity	200 sheets
Bundled software	Adobe Acrobat Standard, Kofax VRS Professional + Bar Code, ScandAll PRO, QuickScan Pro
Power requirements	AC 100 - 240V, 50 / 60 Hz
Maximum scan area (ADF) (imperial)	11 x 17 \
Minimum scan area (Auto Document Feeder)	2 x 3 \
Power consumption (standby)	6 W
Power consumption (typical)	216 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	299.72 mm
Width	431.8 mm
Weight	17009.7 g