24
10Select the [Scan] menu D [Scan Settings].
D
The [Scan Settings] dialog box appears.
11Clear the [Save to file] checkbox.
12Click the [Scanner Setting] button.
D
The scanner driver’s setting dialog box appears.
13Configure scanner settings such as the resolution and paper size.
■ TWAIN scanner driver
Configure scan settings, and then click the [OK]
button.
When using Kofax VRS for the first time, the [Register Kofax VRS] screen appears. User regis-
tration is required to obtain support information from Kofax as well as to upgrade the software,
though Kofax VRS can still be used without user registration.
To register later, select [Start] menu - [All Programs] - [Kofax VRS] - [Kofax VRS Administration
Console], and follow the on-screen instructions.
For details, refer to the Kofax VRS Installation Guide (PDF) which is included in the Setup
DVD-ROM (\VRS\SVRS\SVRS\Documentation).
You only check the operation now, so you do not have
to save to file.
The setting dialog box of the scanner
driver may be displayed again after the
[OK] button is clicked. In such case, click
the [Scan] button in the dialog box.
To Next Page
Loading...
