First-time setup of your d evice
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to th e mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use yo
ur device for the first time, the operating system
is pre-installed on the
hard disk.
► Switch on your device.
► During installat
ion, follow the instructions on screen.
If a Windows ope
rating system is installed on y our device, you will find more
information on
the system and drivers, help programmes, updates, manuals etc. on
the device or o
n the Internet under "
http://www.fujitsu.com/fts/suppo r t/".
You can find inf
ormation and help on the Windows operating system functions
on the Inte rn
et at "
http://window s.microsoft.com" .
Fujitsu 21
To Next Page
Loading...
