Fujitsu LIFEBOOK E449 - Password Protection for the Hard Disk

Security functions
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the PasswordonBootoption and press the Enter k ey.
► Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
► Select the Save Changes & Exit option u nder Exit.

The notebook reboots. You will be prompted to enter your password (the superviso r password).
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the PasswordonBootoption and press the Enter k ey.
► Select the Disabled option and press the Enter key.

If you d o not want to change any o ther settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option u nder Exit.

The notebook will reboot. The system is no longer password-protected.
Password protecti
on for the hard disk
If a supervisor password has been assigned, a password for the hard disk can
also be set in the Hard Disk Security menu.
The hard disk is protected by this password. Data on this h a rd disk can only be read
into another system if the correct password has been entered.
Fujitsu 47