Removing and installing components
during servicing
Attaching the cover
2
1
2
► Place the cover in the correct mou nting position (1).
► Tighten the scre
ws (2).
The LIFEBOOK E4
49 has 2 screws and the LIFEBO O K E459 3 screws.
► Complete the installation, see "
Finishin g c omponent removal", Page 63.
Finishing component removal
After you have removed or changed the system components as you required, please
prepare y our device for operation again as follows:
► Install the batte ry again (see "
Installing a battery", Page 36).
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that yo u disconnected before.
Fujitsu 63
To Next Page
Loading...
