Appendix
Installing the Software after the Recovery Image is Restored
Note: The following steps are ne eded only if you restore the image from th e
DVD Recovery Disc Se t that y ou purchased.
Installation of essential access software
1. Insert the bootable disc in your DVD drive.
2. Open the Drivers folder in the disc, and follow the steps in readme.txt. If there is not a Drivers
folder in the Bootable Disc, the computer does not need the essential access software.
The recovery image already has the essential access software installed.
3. You can now connect to the Internet and download F S DM (Fujitsu Software Download
Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloa ded yet.
Auto Installation support for the software downloaded from support website
1. Download FSDM (Fujitsu Software Download Manager) from the support site and dow nload all
the drivers applicable to the model and OS using FSDM if they are not downloaded ye t.
2. When the software packages are d ownloaded from the web, it is important to
download the Auto Installer Software package a nd the model/language-specific
Readme file if you prefer to auto install the software.
3. It is important to have the extracted Auto Installer software package folder
and Re adme file in the same location as other software folders. Otherwise
auto-installation of the software will not be supported.
4. Inside the Auto Installer software package, launch FjAutoinstall.exe as administrator.
5. Click Yes on the User A ccount Control dialog box. This will take some time to
process the software packages. A m essage w ill be displayed during this time
stating Please wait while the content is being processed.
6. If the EULA is displayed for the Fujitsu Software Auto Installer, accept
the EULA, otherwise continue.
7. The Fujitsu Software Auto Installer user interface will be launched providing the ability
to auto install the software downloaded from support site.
8. It is recommended that you install all the software in the listed order. You can
Select Al l, to install the software in th e order listed.
9. Click the Install button to star t the in stallatio n.
10. After installing all the selected drivers, the Installation Results window is displayed. Click OK.
11. The You mu st restart the system for the settings to take effect. Do you wish to
reboot now? message appears. Select Yes.
12. The system will now reboot.
Fujitsu 101
To Next Page
Loading...