Connecting external devices
USB port with charging function (Anytime USB charg e)
USBchargingfunction
It is reco mmended that the notebook be operated with the AC ada pter connected
whenever the USB port with charging function is in use, as this function will drain
the battery more quickly if an external USB device is be ing charged.
The AC adapter must already b e connected when the notebook is switched
off, as otherwise the USB charging function will be d isabled and the
connected USB de vices will not b e charged.
Some USB devices (e.g. mobile telephony) require a driver in order to utilize the USB
charging function. In this case the USB charging function will not work when the
notebook is switched off, as no drivers are active when the noteb ook is switched off.
You can use this
USB p ort to charge or supply power to a USB device (e.g. to charge
a PDA or a mobile
phone or to connect a USB lamp).
This is possib
le even when the notebook is switched off; in the BIOS-Setup-Utility in the Advanced
menu the funct
ion A nytime USB C harge must be activated. If the se tting AC is se lected thereby,
the device wil
l only be charged when the mains adapter is connected.
Calling and
using the BIOS-Setup-Utility is described in the section
"
Settings i
n BIOS Setup U tility", Page 69.
58 Fujitsu
To Next Page
Loading...