Removing and in stalling components
during servicing
Attaching t he cover
2
1
► Place the cover in the correct location (1).
► Tighten the screw (2).
Finishing component removal
After you have removed or changed the system components as required, please
prepare your device for operation again as follows:
► Install the battery again, see "
Install ing a rechargeable ba ttery", Pag e 34.
► Turn the notebook the right way up ag ain and place it on a flat surface.
► Reco nnect the cables that were previously disconnect ed.
68 Fujitsu
To Next Page
Loading...