Working w ith the notebook
Using the energy saving functions
EnergyEnergyBattery
The notebook uses less power when the available energy-saving functions are used. You will
then be able to work longer when using the battery before havin g to recharge it.
The energy efficiency is increased and environmental p ollution i s reduced.
By choosing the best power options, you can make signi ficant savings and
at the same time help protect the environment.
When you fold down and close the LCD screen, depe nding on the setting in Windows,
the notebook automatically enters a power saving mode.
The reco mmended settings for the Windows energy saving functions are predefined a s "Fujitsu
Computer EcoSettings" in the P ower O ptions of the Control Panel and can be displayed there.
► Set the energy saving functions in your Control Panel.
If you need further information about an option, you can get help with most
settings by pressing
F1
to op en the Microsoft Help.
When the notebook i
s in energy saving mode, the following must be remembered:
During energy sa
ving mode, open data is h eld in m ain memory or
in a swap file on th
e hard disk.
Never switch th
e notebook off while it is in an energy saving mode. If the built-in battery
is nearly flat, c
lose all open files and do not go into energy saving mode.
If you do not intend to use your notebook for a long period of time:
► Exit energy saving mode if necessary by moving th e mouse , making an entry at the keyboard
or by switching on the notebook.
► Close all opene d programs and completely shut down the notebook.
40 Fujitsu
To Next Page
Loading...