Fujitsu Lifebook T900 - The External Monitor Is Blank or the Image Is Unstable; The Cursor Does Not Correctly Follow the Pen Movements

Troubleshooting and tips
The external m onitor is blank or
the image is unstable
ScreenMonitor
Cause Troubleshoot ing
The wrong external monitor has been
selected
or the wrong screen resolution has b
een set for
the application program.
► Terminate the application program
in
Windows by pressing
Alt
+
F4
.Ifthe
fault persists after closing the p
rogram, use
the key combination for switching
the screen
output (see "
Key combinations
", Page 45)to
switch over to the notebook’s L
CD screen.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
foryouroperatingsystem.
► Select monitor: Select monito
r1or2as
described in the documentatio
n for your
operating system.
The cursor does not correctly follow the
pen movements
Cause
Fault e limination
Pen incorrectly calibrated Windows XP
► Ca librate the pen as shown under Tablet
and Pen Settings in the Control Pane l, see
"
Sett ing the pen", Page 38 and "Calibrati ng
the pen", Page 38.
Windows Vista
► Ca librate the p en as show
n under Tablet PC
Settings in the Control
Panel, see "
Setting
the pen", Page 38 and "Cal
ibrating the pen ",
Page 38.
Windows 7
► Ca librate the pen as show n under Hardware
and Sound / Tablet PC Settings in the Control
Panel, se e "
Setting the pen", Page 38 and
"
Calibrating the pen", Page 38.
114 Fujitsu Technology Solutions