Working with the notebook
Optional wireless components Wireless LAN
/BlueTooth/UMTS
The installation of radio components not approved by Fujitsu Technology Solutions
will invalidate the certifications issued for this device.
Depending on the device configura tion you ordered, your device will be
equipped with W ireless LAN, Bluetooth and / or UMTS.
Switching the wireless components on and off
Before switching on your device for the first time, the on/off switch for
radio com ponents must be in the "ON" positio n.
► Slide the ON /OFF switch into the "ON"
position to activate the radio components.
Wireless LANWireless LANBluetoothBluetooth
or
► Slide the ON/OFF switc h to the
"OFF" position to deactivate the
radio componen ts.
If you switch o
ff the radio compone nts, the wireless LAN transmission unit (antenna)
and, if presen
t, the Bluetooth and U M TS module will also be switch ed off.
You can enable
and disable the installed radio component s individually
using the Wire
lessSelect or programme
You can also dea
ctivate the wireless components in dividually in the BIOS Setup.
For this to occ
ur, you must either not have assigned a supervisor password or if a
supervisor p
assword has been assigned , you must know this password.
Pay attention
to the additional safety notes for devices with w ireless
components p
rovided in the " Safety" manu al.
Details on usi
ng Wireless LAN can be found in the online help system
included in t
he W i reless LAN software.
You can find mor
e information on how to use Bluetooth on the C D you
received wit
h your Bluetooth software.
You can obtai
n more information on UMTS from your service provider.
Fujitsu Technology Solutions 69
To Next Page
Loading...
