Working with t he notebook
Charging the stylus battery
The stylus contains a bu ilt-in batte ry, which is automatically charged when the stylus is fully inserted
in its slot. The stylus i s also charged when th e notebook is in power saving mode or is switched off.
A c harging time of approximately 15 seconds is sufficient to able to stylus to be used for 90 minutes.
► Insert the stylus fully into the slot.
After a charging period of approximately 5
minutes, the stylus battery is fully c harged.
Adjust ing the stylus
Operating system Menu
Windows 10 Under System Control - Hardware and Sound - Pen and Touch you c an make
various settings for the stylus.
Calibrating the
stylus
Before first use with the stylus, you must calibrate your Tablet PC via the operating
system, so that it recognizes the stylus as accurately as possible.
You should also always repeat the calibration if the co-ordination between the
stylus and the cursor movement deteriorates.
Operating system Menu
Windows 10
To calibrate, run the Hardware and Sound / Tablet PC Settings function in the
Control Panel. You need to calibrate both portrait and landscape formats.
Fujitsu 37
To Next Page
Loading...
