Security functions
Brief overview of the security functions
Detailed information about the security equipment of your system can be found
in the "Professional Notebook" m an ual, on the "Drivers & Utilities" CD/DVD
or on our website at "
http://solutions.us.fujits u.com".
Security function Type of protection
Preparation
Security Lock
Mechanical Fit and lock the Kensingto
n
Lock Cable (accessory).
Palm vein sensor (configuration
dependent)
Biometric
Install the supplied software.
BIOS password protection Password protection for
the BIO S Setup, operating
system and hard disk with
supervisor and user password.
The passwords consist of a
maximum of eight alphanumeric
characters.
Specify at least one supervisor
password in the BIOS Setup
and activate the password
protection for the o perating
system and hard disk as
desired.
Boot from Removab
le Media
Prevents unauthorized booting
of an operating system from
external media (e.g. USB stick,
USB CD-ROM drive, etc.).
In th e BIOS Setup,
go to the
Security menu and
edit the Boot
from Remo vable M
edia option.
Owner Informa
tion
Display service desk or owner
information during the boot
process.
In th e BIOS Set
up,gotothe
Security menu
and edit the
Owner Inform
ation option.
System lock The BIOS and the sys tem can
only be started with SmartCard
and P IN.
Initialize the SmartCard in the
BIOS.
Smartcard reader PIN and SmartCard protection
for the operating system
To use t he SmartCard reader
functions, install the supplied
(or other suitable) software.
Trusted
Platform Module
Identifi
cation and authentication
of the no
tebook
Define a s
upervisor password
in the BI
OS Setup and enable
the TPM (
Security Chip).
Fujitsu 65
To Next Page
Loading...
