Working with the notebook
Removing and installing the battery
Only use batteries approved by Fujitsu for your notebook.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for long periods in the discharged state. T his
can make it impossible to recharge.
Removing a battery
Please observe the safet
y information in chapter "
Important notes", Page 14.
Remove the power plug fr
om the power outlet!
► If the notebook is connected to a USB Type-C dock, release the USB cable
(USB Ty pe-C) to disconnect the connection.
You can replace the device’s battery without having to switch the device off
first. The device has a built-in buffer batt ery for this purpose. If the battery is
unlocked while the device is in operating mode, Sleep Mode w ill automatically
be activated. Before removing the battery, please check the battery replacement
status indicator (see "
Status indic ators", Page 23).
► Close the LCD screen.
► Remove all the c
ables from the device.
► Turn the device over and place it on a stable, flat and clean surface. If necessary, lay an
anti-slip cloth on this s urface to pre vent the device from being scratched.
3
2
1
4
► Slide the Bat tery Lock slider switch in the direction of the arrow (1) and hold it in place.
50 Fujitsu
To Next Page
Loading...
