Removing and installing components
during servicing
Installing and removing an M.2 m
odule
Remove the cover
► Prepare for removal, see "Preparing to remove components", Page 78.
1
2
► Remove the screw (1).
Keep the screw in a safe place. If you are removing m ore than one component at
the same time, store the screws for the individual components separately from each
other. If you install the wrong screws, compo nents may be damaged.
The screws are not all the same length and when the cover is installed,
the c orrect screws must be used.
► Lift the cover off the notebook (2).
82 Fujitsu
To Next Page
Loading...
