Tro ubl eshooting and tips
The notebook stops working
NotebookEnding
Cause Troubleshooting
The notebook is in energy savin
g mode.
► End energy saving mode.
An application program has ca
used the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The batte ry is dead.
► Charg e the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter t
o the notebook.
The printer does not print
Printerdoesnot p
rint
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation s upplied with the printer).
The printer is not connected correctly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty o r n ot c orrectly
installed, or it is th e wrong printer driver.
► Check whether the correct printer driver is
loaded (refer to the printer d ocumentation).
The wireless connection to a n etwork does not work
Thewirele
ssconnection toanetwork doesnotw ork
Cause Troubleshooting
The w ireless component is switched off. ► Switch the wireless component on (see
"
Switching the wireless componen ts on and
off", Page 58).
The wireless component is sw itched on . Despite
this, the wireless c onnection to a network does
not work.
► Check whe
ther the wireless connection is
enabled b
y the software.
► Further information on using the wireless
component can be found in the help files.
Fujitsu 93
To Next Page
Loading...
